Las Vegas, NV
Our Services
Mobile sandblasting for every surface, every job site. We come to you.
Clean Works operates fully mobile — our equipment comes to your job site, yard, or facility. No hauling, no downtime waiting for parts to come back from a shop. We work around your schedule and get surfaces ready fast.
The foundation of every good coating job.
Surface Preparation
Proper surface prep is the most critical step before any paint, primer, or protective coating. We blast steel, iron, aluminum, and other metals down to bare substrate — removing mill scale, rust, old coatings, and contaminants. We work to SSPC and NACE standards including SP-6 (Commercial Blast), SP-10 (Near-White Metal), and SP-5 (White Metal) profiles.
- Structural steel and fabricated components
- Pipe, tank, and vessel exteriors
- Bridges, railings, and handrails
- New construction and maintenance recoating
Strip it down. Start clean.
Rust & Paint Removal
Years of rust, multiple layers of old paint, or failed coatings — we remove it all. Our abrasive blasting cuts through corrosion and old finishes faster and more thoroughly than grinding or chemical stripping, leaving a clean anchor profile ready for new coatings.
- Heavy rust and scale removal
- Multi-layer paint stripping
- Failed epoxy and urethane removal
- Weld spatter and mill scale removal
Clean slabs. Ready for coating or inspection.
Concrete Cleaning & Prep
We blast concrete surfaces to remove oil stains, curing compounds, old coatings, laitance, and surface contamination. Whether you need a concrete floor ready for epoxy, a parking structure prepped for waterproofing, or a foundation cleaned for inspection, we deliver a consistent surface profile.
- Warehouse and industrial floor prep
- Parking structure and garage decks
- Foundation and retaining wall cleaning
- Oil, grease, and stain removal
Gone without a trace.
Graffiti Removal
Sandblasting removes graffiti from masonry, concrete, brick, and metal without damaging the underlying surface. We match blast media and pressure to the substrate so the surface is clean and intact — not etched or eroded.
- Brick and block walls
- Concrete and CMU surfaces
- Metal panels and doors
- Retaining walls and sound barriers
We come to your yard.
Equipment & Machinery Blasting
Heavy equipment, trailers, skids, and fabricated steel — we blast on-site at your yard or facility. No need to haul equipment to a shop. We strip frames, buckets, beds, and structural components down to bare metal, ready for primer and paint.
- Excavators, loaders, and dozers
- Trailers and flatbeds
- Skids and equipment frames
- Fabricated steel components
Full fleet prep. One call.
Fleet & Vehicle Blasting
We handle commercial vehicle fleets for repainting or protective coating. Trucks, utility bodies, tankers, and specialty vehicles — we blast the entire exterior or targeted areas, delivering a consistent surface profile across your whole fleet.
- Commercial trucks and utility bodies
- Tanker and bulk trailers
- Service vehicles and vans
- Specialty and emergency vehicles
Dustless Blasting — Las Vegas, NV
Dustless Blasting Services
The cleaner, faster alternative to traditional sandblasting — with zero dust cloud.
What Is Dustless Blasting?
Clean Works offers both traditional dry sandblasting and dustless (wet) blasting, so we can match the right method to your project. Dustless blasting mixes water with abrasive media inside the blast pot, eliminating the dust cloud that traditional sandblasting produces. The result is a faster, cleaner process that's safer for surrounding areas, nearby workers, and environmentally sensitive job sites.
Dustless blasting — also called wet blasting or vapor blasting — uses a pressurized mixture of water and abrasive media to strip surfaces. The water encapsulates the dust particles as they're released, preventing them from becoming airborne. This means no dust cloud, dramatically reduced cleanup time, and the ability to work in areas where traditional dry blasting would be restricted or impractical. The wet media also flash-rusts the surface slightly, which can actually improve coating adhesion on steel.
Traditional Sandblasting vs. Dustless Blasting
Traditional Sandblasting
- Dry abrasive — creates a large dust cloud
- Requires containment in populated or sensitive areas
- Best for open job sites, industrial yards, and remote locations
- Faster media consumption, lower per-hour cost on large open jobs
- Ideal for structural steel, bridges, and heavy industrial work
Dustless Blasting
- Water + abrasive — virtually no airborne dust
- Can work near traffic, businesses, homes, and occupied buildings
- Best for urban job sites, vehicles, boats, and residential projects
- Reduces cleanup time and environmental impact significantly
- Ideal for automotive, fleet, graffiti removal, and tight spaces
What We Use Dustless Blasting For
Automotive & Classic Cars
Strip paint, rust, and body filler from car bodies, frames, and panels without warping thin sheet metal. Dustless blasting is gentler than dry blasting on automotive surfaces.
Fleet Vehicles & Trailers
Prep commercial trucks, utility trailers, and fleet vehicles for repaint in parking lots, yards, or facilities where dust containment isn't practical.
Graffiti Removal in Urban Areas
Remove graffiti from walls, storefronts, and public surfaces in busy commercial areas without shutting down neighboring businesses or creating a dust hazard.
Residential & HOA Properties
Clean fences, block walls, driveways, and pool decks in residential neighborhoods where a dry blast dust cloud would be unacceptable to neighbors.
Concrete & Masonry
Strip coatings, clean stains, and prep concrete surfaces in occupied facilities, parking garages, and commercial properties with minimal disruption.
Boats & Marine Equipment
Remove bottom paint, barnacles, and rust from boat hulls and marine equipment. The wet process is ideal for fiberglass and aluminum hulls.
Why Choose Clean Works for Dustless Blasting in Las Vegas?
- We own and operate our own dustless blasting equipment — no subcontracting
- 15+ years of blasting experience across both methods
- We assess your job and recommend the right method — or a combination of both
- Fully mobile — we come to your location anywhere in Clark County
- Licensed and insured in Nevada
Need Dustless Blasting in Las Vegas?
Call us or request a free quote online. We'll assess your project and recommend the best approach — traditional, dustless, or a combination of both.
Need a Quote?
Tell us what you've got. We'll get back to you within 24 hours.